COMMISSIONING ENGINEER

Key responsibilities for the role include:

• Safe testing and commissioning of completed installation to achieve necessary plant performance in accordance with project program me requirements
• Evaluating the Plant Status prior commissioning start as per the approved drawings
• Supervising site team to perform the required commissioning activities according project schedule
• Conducting Process commissioning, Functional, Performance and reliability test for equipment’s and plants
• Supervising control panels, PLC & SCADA testing and commissioning.
• Planning, assigning, supervising, review and participate in the work of staff responsible for maintenance of the wastewater treatment plant including repair and installation of all electronic, electric, hydraulic, pneumatic and mechanical equipment.
• Coordinate and execute testing and full life cycle of onsite commissioning activities with tight deadlines and in line with specified equipment requirements.
• Monitoring progress and recording all test results witnessing final test and acceptance of equipment and completion of all documents.
• Commissioning plans through the detailed design and installation phase, attend HAZOPS, HAZCOMMs and other risk reduction meetings, arrange and manage sampling activities to be carried out during testing.
• Identifying the problems and shortcomings with existing system and providing advice on operational procedure.
• Installation of systems and equipment and ongoing preventive maintenance, repair and calibration after installation

Skills:

• Process Design Calculations involving sizing of various units of ETP, STP & WTP
• Preparation of various Bill of Quantities Viz. List of Mechanical Units, Electrical Load list for various mechanical drives involved in the STP & ETP, List of instruments for all units, Chemical & all other utility consumption data
• Preparation of Process Flow Diagram (PFD), Hydraulic Flow Diagram (HFD), Piping & Instrumentation Diagram (P&ID), Overall Layout Plan of the whole plant
• Good problem solving mind with design calculations for various process
• Good knowledge to operate the computer skills.

ACADEMIC BACKGROUND :
B. Tech in Chemical Engineering OR with equivalent

CONTACT US:
GO TO OUR CARRERS PAGE AND DROP YOUR CV

Site/Service Chemist – Water Treatment

Key responsibilities for the role include:

• Water Sampling, Analysis, monitoring, and suggestion of water management programs for boilers, cooling towers, chillers, and potable water systems.
• Visit client’s sites, sample water, and conduct different types of analysis
• Establish chemical dosing, analyze and solve related problems

Qualifications/Requirements:
B. Sc Chemistry/ M. Sc Chemistry
U.A.E Driving License is a MUST.

Experience : 2 – 3 Years.

Location: UAE

JOB OPENING – MECHANICAL DRAUGHTSMAN – EXPERIENCED IN WASTEWATER TREATMENT/RO/FILTRATION LOCATION – DUBAI, UAE

Key responsibilities for the role include:

• Preparation of Piping & Instrumentation Diagram. (P&ID) Eq. Layout
• Preparation of Mechanical & Installation Piping Layout, Electrical Cable Tray Layout
• Preparation of Mechanical Data Sheet for Tanks & Vessels
• Preparation of Mechanical & Isometric Piping General Arrangement / Detail drawings
• Preparation of the treatment chain cost, both for direct and indirect (soft) costs
• Participate in the technological transfer of various established or emerging technologies within the company, particularly in the strategic sector of wastewater and industrial water treatment. This transfer will be commercial (to the sales team) and technical (to the conception and fabrication team)
• Preparation of Process & Instrumentation Diagram. (P&ID) Eq. Layout
• Preparation of the design criteria according to the requirements
• Preparation of the proposal defining the treatment chain
• Preparation of Mechanical & Installation Piping Layout, Electrical Cable Tray Layout
• Preparation of Mechanical Data Sheet for Tanks & Vessels
• Preparation of Mechanical & Isometric Piping General Arrangement / Detail Drawings
• Preparation of Civil GA, Foundation drawing, and Detail Drawings / Sectional drawings
• Preparation of Pressure Vessel GA / Fabrication Vessel GA / Fab. with BOM
• Preparation of CIP Skid, UF Skid, RO Skid.
• Preparation of Tanks Vessels and Isometric with MTO.
• Coordinate with Vendors for various Technical Reviews about Projects.
• Knowledge of all the design codes such as ASTM, ASME, ANSI, API Etc.

THE CANDIDATE MUST BE IN UAE, ELSE DO NOT APPLY. URGENT REQUIREMENT MUST JOIN IMMEDIATELY

Electrician for Wastewater treatment department

Key responsibilities for the role include:

• Network cabinet, installation and maintenance
• Power cable laying and glanding works termination as per given drawing plan.
• Working as maintenance of all electrical equipment.
• Power Panel installation and termination.
• Industrial wiring, power cable laying, glanding, and termination.
• The installation, maintenance, overhaul, repair, and testing of power generating and distribution equipment.
• Rotating equipment and their associated digital and analogue controls including micro-processor based controls, devices and systems; utility protective relays and controls; fibre optic cable, terminations and devices; communications and signalling systems; standby and emergency power sources, and other electrical equipment found in wastewater collection and treatment facilities.

Qualifications/Requirements: Diploma or ITI

Experience : 1 – 2 Years

Location: Dubai, United Arab Emirates

Lathe operator

Key responsibilities for the role include:

• Prepare the material required for fabrication.
• Make thread (BSPT, NPT) on SS, CS, GI, PVC pipes using manual lathe machine.
• Make groove on SS Pipes & PVC pipes
• Make chamfer on SS, MS, PVC pipes.
• Use proper tools to perform operation on the lathe.
• Perform regular preventive maintenance on the manual lathe machine to ensure the lathe machine performance is maintained.
• Suggest and keep regular inventory of dyes or lubricant required for smooth operation of the lathe.
• Read drawings and fabricate parts as per drawing.
• Ensure finished parts are inspected & meets the requirements.
• Good Knowledge of using measuring tools such as Vernier callipers, micrometres, depth gauges etc.

Qualifications/Requirements: Diploma or ITI

Experience : 1 – 2 Years

Location: Dubai, United Arab Emirates

DESIGN & PROPOSAL ENGINEER

Key responsibilities for the role include:

• Preparing proposals for the clients regarding wastewater, sewage and water treatment plant requirements.
• Coordinate with the engineering department regarding detail design of proposed wastewater, water and sewage treatment plant facilities.
• Provide replies to request for clarifications from the clients regarding the submitted proposals.
• Conduct site inspections and attend pre-bid meetings when required.
• Attend kick-off meetings with the clients regarding the accepted project proposal when required.
• Experience in Seawater (R/O) Desalination systems Understanding of Water and Wastewater Treatment Equipment & Processes for Pre/Post treatment (Conventional equipment, MF/UF RO, EDR, EDI, IX, MBR).

Qualifications/Requirements:
B.Tech. in Chemical, Mechanical Engineering or other technical discipline.

Experience : 1 year

Location: Dubai , United Arab Emirates

Sales Engineer– Filtration and Reverse Osmosis Sales

Key responsibilities for the role include:

• Multimedia filters, Activated carbon filters, R.O membranes, Anticipants, DE chlorination chemicals, cleaning chemicals, Minerals for drinking water, UV’s, Cartridges, Bag Filter housing.
• Regular visits to client facilities to understand business activities and requirements of the client.
• Handling enquiries.
• Arranging site visits.
• Preparing quotations & reports.
• Designing filters.
• Negotiating contracts, terms & conditions and closing sales.
• Getting quotes from vendors.
• Maintaining records of customer communication & sales activity.
• Liaising with other members from the sales team and other technical experts.
• Handling technical sales issues & solving client problems.
• Providing pre-sales & after sales support services.
• Searching for new clients who might benefit from company products & services

Qualifications/Requirements:
Bsc Chemistry/ Msc Chemistry/ Chemical Engg/Mechanical Engg
U.A.E Driving License is an Added Advantage.

Location: UAE

Chemical Sales Engineer – Water Treatment

Job Description :

• Work experience in sales and marketing of Water Treatment Chemicals for Boilers, Cooling Towers, Chillers, Potable Water and Swimming Pools.
• Handling and improving clientele database and maintaining good relations with them in terms of the technical services provided.
• Attending client meetings and providing technical solutions for the chemical treatment of systems.

Qualifications/Requirements:
Bsc Chemistry/ Msc Chemistry/ Chemical Engineering
U.A.E Driving License is an Added Advantage.

Location: UAE